Error: The job that you were looking for either does not exist or is no longer open.
Position: Quality Inspector
Location: Fort Collins, Co
Duration: 6 month (180 days) Extension as needed per customer
Frequency: 6-8-hrs per week - Part Time
Job Description:
The quality inspector shall travel to the supplier facility to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. The inspector will be required to report inspection accept / reject information directly to the customer via web application.
Requirements:
Candidate must have practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. Candidate should be computer savvy and own a laptop for this assignment. Will be working as an independent contractor (1099).
Industry: Aerospace/Defense
Position: Mechanical Inspector
Location: Denver, CO & Surrounding AreasDuration: On-going contract Frequency: as required by supplier (launch based) approx 4 hrs/week.
Job Description:
- The quality inspector - Mechanical, shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies.
- Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications.
- The inspector will be required to report inspection accept / reject information directly to the customer via web application.
Requirements:
- Candidate must have 3 years practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies.
- The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard.
- Must have the ability to read / interpret engineering drawings and Purchase Orders (POs).
- The candidate must have experience using various mechanical inspection tools, such as micrometers, calipers, pin gauges, thread gauges height gauges, CMM, and hardness testers.
- Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required.
- Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel.
- Candidate should be computer savvy and own a laptop for this assignment.
- Will be working as an independent contractor (1099).
- Must be a U.S. Citizen
Supplier recovery needed in 09648 MITTWEIDA | GERMANY:
- Support multiple functions towards supplier (Supply Chain & Quality, Engineering, IPT, etc
- Set up and drive recovery plans, follow up defined actions, etc…
Expediting and Delivery Assurance involves on-site supplier engagement and structured reporting on Work-in-Progress (WIP) relative to the supplier’s production planning and the Customer’s need date. Expediting improves supplier delivery performance through direct supplier engagement to assess, prioritize, coordinate and improve part delivery dates.
“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, disability status, protected veteran status, or any other characteristic protected by law.”
Supplier recovery needed in Berantevilla (Álava), Spain:
- Support multiple functions towards supplier (Supply Chain & Quality, Engineering, IPT, etc
- Set up and drive recovery plans, follow up defined actions, etc…
Expediting and Delivery Assurance involves on-site supplier engagement and structured reporting on Work-in-Progress (WIP) relative to the supplier’s production planning and the Customer’s need date. Expediting improves supplier delivery performance through direct supplier engagement to assess, prioritize, coordinate and improve part delivery dates.
“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, disability status, protected veteran status, or any other characteristic protected by law.”
Supplier recovery needed in Madrid, Spain:
- Support multiple functions towards supplier (Supply Chain & Quality, Engineering, IPT, etc
- Set up and drive recovery plans, follow up defined actions, etc…
Expediting and Delivery Assurance involves on-site supplier engagement and structured reporting on Work-in-Progress (WIP) relative to the supplier’s production planning and the Customer’s need date. Expediting improves supplier delivery performance through direct supplier engagement to assess, prioritize, coordinate and improve part delivery dates.
“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, disability status, protected veteran status, or any other characteristic protected by law.”
Supplier recovery needed in Anjo, Japan:
- Support multiple functions towards supplier (Supply Chain & Quality, Engineering, IPT, etc
- Set up and drive recovery plans, follow up defined actions, etc…
Expediting and Delivery Assurance involves on-site supplier engagement and structured reporting on Work-in-Progress (WIP) relative to the supplier’s production planning and the Customer’s need date. Expediting improves supplier delivery performance through direct supplier engagement to assess, prioritize, coordinate and improve part delivery dates.
“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, disability status, protected veteran status, or any other characteristic protected by law.”
Industry: Aerospace/Defense
Position: Mechanical Inspector
Location: New Market VA and surrounding areas Duration: On-going contract Frequency: approx 4/hrs per week but will fluctuate week over week
Job Description:
- The quality inspector - Mechanical, shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies.
- Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications.
- The inspector will be required to report inspection accept / reject information directly to the customer via web application.
Requirements:
- Candidate must have 3 years practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies.
- The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard.
- Must have the ability to read / interpret engineering drawings and Purchase Orders (POs).
- The candidate must have experience using various mechanical inspection tools, such as micrometers, calipers, pin gauges, thread gauges height gauges, CMM, and hardness testers.
- Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required.
- Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel.
- Candidate should be computer savvy and own a laptop for this assignment.
- Will be working as an independent contractor (1099) - Must have LLC/DBA or Sole Proprietorship
- Must be a U.S. Citizen
Position: Quality Inspector
Location: Hermosillo, Sonora, Mexico
Duration: Project End Date 10/31/2024 (Extension per customer need)
Frequency: 40-hrs per week - Full time
Candidate Locations:
Our customer is looking for Aerospace Quality Inspectors in Hermosillo.
Job Description:
The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. The inspector will be required to report inspection accept / reject information directly to the customer via web application.
Requirements:
Candidate must have practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. Must have the ability to read / interpret engineering drawings and Purchase Orders (POs).
Must have experience working with wireharnesses, Conduit Assemblies, Spoilers and Connectors.
The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel.
Candidate should be computer savvy and own a laptop for this assignment. Will be working as an independent contractor (1099).
Industry: Aerospace/Defense
Position: Mechanical Inspector
Location: Obregon MXDuration: On-going contract Frequency: approx 8-16/hrs per week -
Job Description:
- The quality inspector - Mechanical, shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies.
- Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications.
- The inspector will be required to report inspection accept / reject information directly to the customer via web application.
Requirements:
- Candidate must have 3 years practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies.
- The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard.
- Must have the ability to read / interpret engineering drawings and Purchase Orders (POs).
- The candidate must have experience using various mechanical inspection tools, such as micrometers, calipers, pin gauges, thread gauges height gauges, CMM, and hardness testers.
- Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required.
- Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel.
- Candidate should be computer savvy and own a laptop for this assignment.
- Will be working as an independent contractor (1099).
**Seeking an Manufacturing/Quality Expertise to help facilitate Exit PPAPs in Santa Clara (Mexico City) Mexico **
Technical Requirements:
- Previous experience in reviewing and validating the various elements that make up a PPAP
- Demonstrate knowledge of interpreting engineering drawings, CMM data, digital product definition interpretation
- Demonstrate knowledge of geometric, dimensioning and tolerance
- Demonstrate evidence of product specific knowledge and experience in various mechanical assesmblies, sub assemblies and various mechanical parts
- Demonstrate evidence of more than 2-years in the last 5-years of working within an engineering environment for a minimum of 3 years.
Professional Requirements
- Computer proficiency (Word, Excel, Outlook etc.)
- Visual PPAP / FAIR
**Seeking an Manufacturing/Quality Expertise to help facilitate Exit PPAPs in Coimbatore - India **
Technical Requirements:
- Previous experience in reviewing and validating the various elements that make up a PPAP
- Demonstrate knowledge of interpreting engineering drawings, CMM data, digital product definition interpretation
- Demonstrate knowledge of geometric, dimensioning and tolerance
- Demonstrate evidence of product specific knowledge and experience in various mechanical assesmblies, sub assemblies and various mechanical parts
- Demonstrate evidence of more than 2-years in the last 5-years of working within an engineering environment for a minimum of 3 years.
Professional Requirements
- Computer proficiency (Word, Excel, Outlook etc.)
- Visual PPAP / FAIR
**Seeking an Manufacturing/Quality Expertise to help facilitate Exit PPAPs in AL Rushaid, Saudi Arabia**
Technical Requirements:
- Previous experience in reviewing and validating the various elements that make up a PPAP
- Demonstrate knowledge of interpreting engineering drawings, CMM data, digital product definition interpretation
- Demonstrate knowledge of geometric, dimensioning and tolerance
- Demonstrate evidence of product specific knowledge and experience in various mechanical assesmblies, sub assemblies and various mechanical parts
- Demonstrate evidence of more than 2-years in the last 5-years of working within an engineering environment for a minimum of 3 years.
Professional Requirements
- Computer proficiency (Word, Excel, Outlook etc.)
- Visual PPAP / FAIR
Industry: Aerospace/Defense
Position: Certified AS9100 QMS Auditor
Location: Region 4 Division 8 / Various Supplier locations
Duration: On-going
Frequency: 1-2 audits for year
Job Description:
- The auditor will perform examination of the Quality Management System (QMS) and its various elements and procedures in order to ensure its effectiveness, including observing evidence of continuous improvement.
- Perform QMS audits for various suppliers.
- The ability to identify major findings, minor findings, observations, and report information directly to the customer via web application.
- Experience initiating, reviewing and approval of corrective action responses and evaluate effectiveness of implemented corrective action(s).
Requirements:
- Exemplar as ISO9001 Certified QMS Auditor or Probitas AS9100/AS9120 Certfied QMS Auditor required.
- Valid certification is also required.
- Successful completion of at least five external audits in the past year to the AS9100 standard.
- A strong background in the aerospace manufacturing industry.
- Good writing and communication skills.
- Must have proficient computer skills using Microsoft Word and Excel.
- Comfortable working as an independent contractor (1099).
Industry: Aerospace/Defense
Position: Source Inspector
Location: Lexington,NE
Frequency – 4 hrs per Month- part-time - 1099.
Duration: 1 year
Job Description:
Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. Knowledge of standard inspection tools to include CMMs is required. Previous machine shop experience, final inspections and Aerospace products.
Requirements:
- 5+ Years experience in Aerospace Receiving and/or Final Inspection
- Must be a US Citizen
- 5+ years’ experience in FAI and AS9102
- General Mechanical
- General Chemical Film experience
Skills Requirement:
-
- Attention to Detail
- Strong communication skills
- In process and Final Inspection
- Organized
- Able to operate computers
Industry: Aerospace/Defense
Position: Source Inspection
Location: Sugar Grove,IL
Duration: 1 Year
Frequency: 4-hrs per Month– Part Time – Contract Assignment - 1099.
Position Overview:
The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. The inspector will be required to report inspection accept / reject information directly to the customer via web application.
Skills and Abilities:
- Strong Attention to Detail
- Coordinate quality activities with customers and suppliers.
- Precise machining knowledge
Required Qualifications:
- Mechanical Knowledge
- FAI experience
- Casings Experience
Industry: Aerospace/Defense
Position: Quality Manager
Location: Dayton, OH
Duration: On-going
Frequency: Full-Time
Pay Range: $50-$55/hr
Job Description:
Highly skilled and experienced Quality Manager to lead our aerospace quality assurance team. Responsible for developing and implementing quality management systems, ensuring compliance with aerospace industry standards and regulations. The Quality Manager will oversee quality control processes, manage audits, and collaborate with cross-functional teams to drive continuous improvement in product quality and safety.
Duties/Responsibilities:
- Quality Management Systems: Develop, implement, and maintain aerospace-specific quality management systems, ensuring adherence to industry standards such as AS9100.
- Compliance: Ensure compliance with aerospace regulations, customer requirements, and relevant quality standards.
- Audits and Inspections: Plan and conduct internal and external audits to assess compliance and identify areas for improvement. Collaborate with regulatory authorities and customer representatives during audits and inspections.
- Quality Control: Oversee and improve quality control processes, including inspection, testing, and documentation, to ensure the production of high-quality aerospace components.
- Customer Relations: Act as a liaison between the organization and customers on quality-related matters, addressing inquiries and ensuring customer satisfaction.
- Customer Quality Release: Manage team to uphold certified GE DSQR and Rolls-Royce SABRe 4 DQR on staff or other self-release approvals required by the customer base.
- Supplier Quality Management: Collaborate with suppliers to establish and maintain robust quality standards for incoming materials and components.
- Root Cause Analysis: Lead investigations into quality issues, conducting root cause analysis, and implementing corrective and preventive actions.
- Continuous Improvement: Drive continuous improvement initiatives to enhance overall product quality, efficiency, and cost-effectiveness.
- Training and Development: Provide training to employees on quality standards, processes, and industry regulations.
- Documentation and Reporting: Maintain accurate and up-to-date quality documentation, reports, and records.
Required Skills/Abilities:
- In Depth knowledge of ISO 9001:2015, AS 9100D and AS13100.
- Knowledge in statistical process control concepts such as variation, stability, and process capability.
- Strong understanding of regulatory requirements and quality control process.
- Experience in the metal cutting and fabrication industry preferred.
- Certified Quality Manager (CQM) or similar certifications are a plus.
- Computer skills: Microsoft Office, Minitab, PC-DMIS, MeasurLink, Unipoint Quality modules, Job Boss ERP.
- Effective and professional communication skills, both verbal and written.
- Detail oriented and ability to multitask.
- Time management skills. Ability to prioritize and work under strict timelines.
- Experience with root cause analysis and corrective action implementation.
- Researching standards for quality provisions.
- PFMEA, PPAP, APQP, MSA, Control Plans etc.
- Six Sigma experience and/or ASQ CQE preferred.
- Background in defense, aerospace, or automotive industries.
Education and Experience:
- Bachelor’s degree in Quality Management or related field
- Minimum 5 years of work experience in Quality Management within a manufacturing environment.
- GE DSQR and Rolls-Royce SABRe 4 DQR.
“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law. Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”
Industry: Aerospace/Defense
Position: Quality Engineer
Location: Dayton, OH
Duration: On-going
Frequency: Full-Time
Pay Range: $50-$55/hr
Job Description:
To effectively support the overall plant quality system as well as working with suppliers and customers to meet company objectives for new product development and improvement of existing product lines. Effectively analyze problems and provide solutions internally and to our external customers.
Duties/Responsibilities:
- Creation of quality documents and development of Standard Operating Procedures for manufacturing.
- Maintain and revise Quality Assurance Procedures and Instructions as necessary to assure ISO 9001, AS9100 and AS13100 registration.
- Perform internal audits and identify quality system improvements to ensure compliance with quality standards (ISO 9001:2015 & AS9100D).
- Maintain product inspection control plans.
- Identify and determine quality requirements necessary to meet customer needs and expectations.
- Work closely with manufacturing staff to ensure quality protocols are followed and documentation is currently maintained. In addition, implement any new changes or adaptations based on a quality review.
- Complete and submit First Article Inspection documents to customers.
- Maintain and effectively apply knowledge of statistical process control concepts such as variation, control, and process capability.
- Investigate non-conformances and assist manufacturing and engineering teams in determining effective corrective actions
Required Skills/Abilities:
- Knowledge of ISO 9001:2015, AS 9100D and AS13100.
- Knowledge in statistical process control concepts such as variation, stability, and process capability.
- Experience in the metal cutting and fabrication industry preferred.
- Use of dimensional inspection tools and coordinate measurement machines.
- Computer skills: Microsoft Office, Minitab, PC-DMIS, MeasurLink, Unipoint Quality modules, Job Boss ERP.
- Effective and professional communication skills, both verbal and written.
- Detail oriented and ability to multitask.
- Time management skills. Ability to prioritize and work under strict timelines.
- Logical troubleshooting and problem-solving skills.
- Researching standards for quality provisions.
- PFMEA, PPAP, APQP, MSA, Control Plans etc.
- Six Sigma experience and/or ASQ CQE preferred.
- Background in defense, aerospace, or automotive industries.
Education and Experience:
- Bachelor’s degree in quality management, Quality Engineering, Manufacturing Engineering, or similar Engineering discipline.
- Minimum 5 years of work experience in a quality function within a manufacturing environment.
- GE DSQR and Rolls-Royce SABRe 4 DQR.
“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law. Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”
Position: Expediting/Expeditor
Location: Aurora, IL
Duration: 35 days
Frequency: 8 hours per week / part time
**Seeking an Expeditor to visit the supplier once a week for a 5 weeks) contract opportunity**
Job Summary:
- The need is to do expediting at the supplier.
- The main aim is to go through pending documents, and when these will be released, and also review the manufacturing schedule, identifying bottle necks, ensuring goods are coming when expected, and no new surprises pop up
- Being able to dig into the detail to ensure the manufacturing is controlled.
- Some inspections (mechanical) may be required.
Requirements:
- At least 3 years experience in planning, scheduling, execuiting deliveries.
- At least 3 years Aerospace experience.
- At least 3 years experience as an Expeditor.
Industry: Aerospace/Defense
Position: Quality Analyst
Location: Palo Alto, CA
Duration: On-going
Frequency: 40 hours a week (Full-Time)
Pay Range: $50-$55 an hour
The successful candidate will have a minimum of 10 years’ experience as a Quality Professional in the Aerospace and Defense Industry. The candidate must be a self-starter that can work unsupervised, is a fast learner, can meet project deadlines, can create reports, and have excellent communication and presentation skills.
Duties:
- Performing Process Gap Analysis (QMS Process Requirements vs Actual Process)
- Creating PFDs (Process Flow Diagrams).
- Procedure and/or Work Instruction writing.
- Auditing QMS Systems/Process (AS9100 or ISO 9001)
- With an exceptional understanding of and experience with AS9102 Rev “C”
- Creating a SQAR (Supplier Quality Assurance Requirements) Manual.
Education Requirements:
- A Higher Education Degree (BS) in a technical field.
- An ASQ Certification (CQE, CQA or CSQP) is desirable.
- A Certified QMS Auditor is a plus
"We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law. Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”
Position: Quality Inspector
Location: Sonora Mexico Region (Nogales)
Duration: 6 Month Minimum (Extension per customer need)
Frequency: 40-hrs per week - Full time
Pay Range: $28.00
Candidate Locations:
Our customer is looking for (1) resource in Nogales for inspections at supplier
Job Description:
The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. The inspector will be required to report inspection accept / reject information directly to the customer via web application.
Requirements:
Candidate must have practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. Must have the ability to read / interpret engineering drawings and Purchase Orders (POs).
Qualifieid candidates must have experience working with Electronics / Avionics. Specifically in the inspections of wires, cables, harnesses, conduits, connectors.
The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel.
Candidate should be computer savvy and own a laptop for this assignment. Will be working as an independent contractor (1099).