Industry: Aerospace/Defense Position: Mechanical Inspector Location: Plano,TX Frequency – 25 Hours per Week - 1099 Duration: 1 Week  (ASAP-5/17/2024)    Job Description: - Verifies completed product to purchase order, drawing and associated specifications. - Ability to adequately inspect Aerospace level electronic components and assemblies. - Includes CCA or PWB for industry specifications such as J-STD-001 and IPC.   Skills Requirement: - Attention to Detail - Strong communication skills - In process and Final Inspection - Organized - Able to operate computers - Cable Assembly  Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - Certified Weld Inspector - D1.1 or D17 - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA  

Industry: Aerospace/Defense Position: Electromechanical Inspector Location: SR Location Frequency – 6 visits per Month Duration: ASAP-12/20/2024  Pay Rate: $26.00/hr-$30.00 /hr Job Description: Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level electronic components and assemblies. Includes CCA or PWB for industry specifications such as J-STD-001 and IPC. Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102   Skills Requirement: - Attention to Detail - Strong communication skills - Organized - Able to operate computers  

**Seeking an Expeditor to visit the supplier in Puebla, México to ensure ontime delivery.    The need is to do expediting onsite at the supplier. The main aim is to  review the manufacturing schedule, identifying bottle necks, ensuring goods are delivered expected. And being able to dig into the detail to ensure the manufacturing is controlled.     “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, disability status, protected veteran status, or any other characteristic protected by law.”  

Industry: Aerospace/Defense Position: Quality Engineer level 2 Location: Valencia, CA Frequency – 35-40 hours per week Duration: ASAP-Undefined  Pay Rate: $38.00/hr-$54.00/hr Job Description: Utilize quality science techniques to effect continuous performance improvement at assigned suppliers; Reviews, analyzes, and reports on quality discrepancies related to process, assembly, manufacturing, mechanical, electrical, hydraulic, or electro-mechanical systems; Ensure that performance and quality of products conform to established company and regulatory standards; Use surveillance and auditing techniques to identify opportunities for process and product improvement; Interfaces with manufacturing, engineering, customer, supplier, and procurement (as appropriate) to ensure requirements / expectations are satisfied; Facilitate development of supplier recovery plans; Monitor and evaluate supplier process for compliance to purchase order and engineering requirements; Collaborate with supplier to investigate root cause and corrective actions when process or product deficiencies are detected; Identify, plan, and facilitate cross-functional improvement activities; Deploy variation management tools and techniques at select suppliers to mitigate risk; Have performed Quality System Audits, AS9102 First Article Reviews; computer proficiency and proficiency with MS Office products.   Additional Comments Travel is required and may extend beyond the local area. Initial supplier assignments may change to meet customer requirements. Work hours are not fixed or guaranteed and may extend beyond 40 hours per week to meet customer requirements. Aerospace supplier experience is preferred and may be used as the primary selection criteria among equally qualified candidates. Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 Skills Requirement: - Attention to Detail - Strong communication skills - Organized - Able to operate computers - Experience with RRCA and SQARS - 5+ years’ Experience with supplier development   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Experienced quality rep needed in Udine, Italy (Foundry)   Task: Supplier quality oversight for Process and component checks Requirement: - Must have Castings and machining expertise. - Familiar with process and component checks. - Available full time for about a year. - Not worked / working at Cividale/Inossman.

Industry: Aerospace/Defense Position: Source Inspector Location: Various Supplier Locations in Canada Duration: On-going contract  Frequency: 8-16/hrs per week      Job Description: - The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies.  - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications.  - The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Requirements: - Candidate must have practical experience performing in-process and final inspections on machined parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard.  - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers.  Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard.  -  Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel.       

Industry: Aerospace/Defense Position: Source Inspection Location: South Bend,IN Duration: 1 Year Frequency: 1 Visits a year 4 hours each– Part Time – Contract Assignment - 1099.   Position Overview:   - The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Skills and Abilities: - Strong Attention to Detail - Coordinate quality activities with customers and suppliers. Required Qualifications: - Mechanical Knowledge - FAI experience - Chemical Plating experience - welding inspection experience - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA    

Job Description:  Qulity Engineer needed in Penang, Malaysia   Job Designation:   Responsible for developing, modifying, applying, and maintaining quality standards for processing materials into partially finished or finished products. The candidate will be driving capability analysis on development and released product, initiating, participating and driving corrective action, analyzing measurable for standard work, and will develop implementation methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment. The Engineer II, Quality provides a range of expertise to ensure that the products are free of flaws and function as designed. Participates in assuring a high reliability and proper performance per product requirements.   Job Core Responsibilities:   - Perform process audits during the hardware development processes. - Support internal QMS and Customer led audits for the facility. - Support electronics hardware development and sustaining programs. - Responsible for identifying, implementing, and assessing effectiveness of preventive and corrective actions as required. - Support proposal activities as required including contract reviews and flow down of requirements. - Support First Article and receiving inspection functions - Develop, maintain, and support quality assurance plans for various customer programs and is familiar with respective procurement requirements. - Prepare quality and performance metrics. - Perform other duties as assigned or requested. - Mentor and Train co-workers in functional expertise: PFMEA, MSA, Control Plans, Auditing, Inspection and Test Methods - Collect, analyze, improve, and report Quality Data such as scrap, warranty, rework, yield, nonconformance trending   Job Specifications:   - Bachelor's Degree in Engineering, Science, or Mathematics and 5 years of Quality Engineering or equivalent experience. - Knowledge of AS-9100 and ISO-9001 quality management systems. - Experiences and Knowledge of AS9102, MIL-STD-130, ASME B94.9. AMS-QQ-A, ASTM B209, NADCAP, ASME Y14.5 - Experiences of Boeing processes and specs. - Experiences  - Knowledge/experience working in a manufacturing environment. - Knowledge of Quality practices for military / commercial and Industrial is desired. - Knowledge in Lean Manufacturing and continuous improvement methods. - Excellent written and verbal communication skills. - Familiarity with special processes, such as heat treating, chemical processing, and non-destructive testing is desired.

Industry: Aerospace/Defense Position; Source Inspector Location: Indianapolis, IN Duration: 60 Days Frequency: 40 hours per week Pay Range: $25-$28/hr     Job Description:   - Ensure packaging provides adequate protection, and preservation during shipping and storage, noting any part specific requirements - Where bag and tag marking is allowed by the part print, verify that all required elements are stated on the tag - Ensure drawing requirements are met, Ensure correct location / position and completeness and correctness of marking. Verification of serial numbers where required. - Full visual inspection paying particular attention to Burring, Nicks, Dents, Contamination, Finish, Foreign Objects etc. - Review each part assembly for completed assembly operations - Assure part number and serial number on release documents match the production paperwork and physical part   Qualifications:   - Must have 5 years experience in Aerospace - Inspector must have practical experience performing inspection on machined parts, and or sub-assemblies - The inspections will be performed to engineering requirements - Must have the ability to read/ interpret engineering drawings and Purchase Orders(POs) - Must have experience using various mechanical inspection tools, such as micrometers and calipers   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense Position: Source Inspection Location: North Easton,MA Duration: 1 Year Frequency: 3 Visits a year 6 hours each– Part Time – Contract Assignment - 1099.   Position Overview:   - The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Skills and Abilities: - Strong Attention to Detail - Coordinate quality activities with customers and suppliers. - Precise machining knowledge Required Qualifications: - Mechanical Knowledge - FAI experience - Casings Experience  - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA    

Industry: Aerospace/Defense Position: Source Inspection Location: Groton,CT Duration: 1 Year Frequency: 5-hrs per Month– Part Time – Contract Assignment - 1099.   Position Overview:   - The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Skills and Abilities: - Strong Attention to Detail - Coordinate quality activities with customers and suppliers. - Precise machining knowledge Required Qualifications: - Mechanical Knowledge - FAI experience - Casings Experience  - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA    

Industry: Aerospace/Defense Position: Mechanical Inspector Location: Beltsville, MarylandDuration: On-going contract Frequency: 16-24 hrs / week (on-site 8 hrs/day) 1-3 x week or as needed.    Job Description: - The quality inspector - Mechanical, shall provide onsite support to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies as needed by supplier. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Requirements: - Candidate must have 3 years practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers, calipers, pin gauges, thread gauges height gauges, CMM, and hardness testers. - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. - Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Candidate should be computer savvy and own a laptop for this assignment. - Must be a U.S. Citizen - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA      

Job Description:  Qulity Engineer needed in Subang, Malaysia   Job Designation:   Responsible for developing, modifying, applying, and maintaining quality standards for processing materials into partially finished or finished products. The candidate will be driving capability analysis on development and released product, initiating, participating and driving corrective action, analyzing measurable for standard work, and will develop implementation methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment. The Engineer II, Quality provides a range of expertise to ensure that the products are free of flaws and function as designed. Participates in assuring a high reliability and proper performance per product requirements.   Job Core Responsibilities:   - Perform process audits during the hardware development processes. - Support internal QMS and Customer led audits for the facility. - Support electronics hardware development and sustaining programs. - Responsible for identifying, implementing, and assessing effectiveness of preventive and corrective actions as required. - Support proposal activities as required including contract reviews and flow down of requirements. - Support First Article and receiving inspection functions - Develop, maintain, and support quality assurance plans for various customer programs and is familiar with respective procurement requirements. - Prepare quality and performance metrics. - Perform other duties as assigned or requested. - Mentor and Train co-workers in functional expertise: PFMEA, MSA, Control Plans, Auditing, Inspection and Test Methods - Collect, analyze, improve, and report Quality Data such as scrap, warranty, rework, yield, nonconformance trending   Job Specifications:   - Bachelor's Degree in Engineering, Science, or Mathematics and 5 years of Quality Engineering or equivalent experience. - Knowledge of AS-9100 and ISO-9001 quality management systems. - Knowledge/experience working in a manufacturing environment. - Knowledge of Quality practices for military / commercial and Industrial is desired. - Knowledge in Lean Manufacturing and continuous improvement methods. - Excellent written and verbal communication skills. - Familiarity with special processes, such as heat treating, chemical processing, and non-destructive testing is desired.

Industry: Aerospace/Defense Position: Mechanical Inspector   Location: Cedar City, UT Duration: 8-12 weeks Frequency: On-demand / 20 hrs   Job Description: - Perform mechanical inspection using precision measuring devices/instruments at the supplier’s facility to verify compliance with drawings, standards/specifications, and other PO requirements - Verify material certifications against PO requirements, part marking where required and visually inspect for obvious defects/ damage Requirements: - Minimum 5 years of precision mechanical inspection experience is required - Strong understanding of, and experience with, ANSI Y 14.5 GD&T - Ability to read and interpret drawings and basic computer skills are a must - Experience working with tight tolerances - Hands-on mechanical inspection experience - Must have experience working with Mil-standards - Previous source inspection experience - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA  

Industry: Aerospace/Defense Position: Mechanical Inspector   Location: Pomona, CA Duration: 8-12 weeks Frequency: On-demand / 20 hrs   Job Description: - Perform mechanical inspection using precision measuring devices/instruments at the supplier’s facility to verify compliance with drawings, standards/specifications, and other PO requirements - Verify material certifications against PO requirements, part marking where required and visually inspect for obvious defects/ damage Requirements: - Minimum 5 years of precision mechanical inspection experience is required - Strong understanding of, and experience with, ANSI Y 14.5 GD&T - Ability to read and interpret drawings and basic computer skills are a must - Experience working with tight tolerances - Hands-on mechanical inspection experience - Must have experience working with Mil-standards - Previous source inspection experience - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA  

Industry: Aerospace/Defense Position: Mechanical Inspector   Location: Stevensville, MD Duration: 8-12 weeks Frequency: On-demand / 4 hours    Job Description: - Perform mechanical inspection using precision measuring devices/instruments at the supplier’s facility to verify compliance with drawings, standards/specifications, and other PO requirements - Verify material certifications against PO requirements, part marking where required and visually inspect for obvious defects/ damage Requirements: - Minimum 5 years of precision mechanical inspection experience is required - Strong understanding of, and experience with, ANSI Y 14.5 GD&T - Ability to read and interpret drawings and basic computer skills are a must - Experience working with tight tolerances - Hands-on mechanical inspection experience - Must have experience working with Mil-standards - Previous source inspection experience - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA  

Industry: Aerospace/Defense Position: Mechanical Source Inspector Location: Simi Valley, California Duration: On-going contract Frequency: 40/hrs per week    Job Description: - The selected candidate will provide advanced mechanical inspection using precision calibrated tools - The inspector will ensure that only conforming parts are introduced to the manufacturing floor - Utilize various inspection tools such as calipers, micrometers, thread gauges – checks dimensions/processes on parts or raw material to ensure compliance to manufacturing drawings/blueprints/specifications - Work closely with Design Engineering, Project Engineering and Manufacturing to ensure that all manufacturing and inspection activities are performed in compliance with process work documents and customer requirements - Ensures that in-process inspections are completed per engineering specifications during the production process - Perform mechanical, visual and dimensional inspections of parts using inspection hand tools. Document and facilitate disposition of any nonconforming material discovered during the inspection process - Perform Mechanical inspection using CMM (Coordinate Measuring Machine) - Perform receiving document review to ensure unbroken traceability to the respective OEM - Create “approval/reject” tags and document in the requisite databases - Perform First Article Inspections (FAI) to AS9102 guidelines ensuring the manufacturing processes are capable of producing parts that conform to specification and contractual agreements - Perform Final Inspection as required. Interface with customer portals using Net-Inspect and/or customer specified software - Perform verification/calibration of inspection, measuring and test equipment and associated tools - Perform “Internal Audits” to ensure that procedures, processes and protocols are being followed and are effective in their purpose as prescribed by the Quality Management System - Perform additional duties as assigned by the Quality Assurance Manager - Potentially serve as a DQR (Delegated Quality Representative) Requirements: - Experience with First Article Inspections (AS9102) - Have a working knowledge of CMM inspection; interpret inspection report data as it relates to manufacturing requirements - Possess general knowledge of Aerospace Quality Systems and International Standards - Must be familiar with standard concepts, practices and procedures with regards to inspection including proficiency in the use of CMM, comparator, micrometers, thread gauges and calipers - The ability to read blue prints, check dimensional properties of parts or raw material to ensure compliance to manufacturing drawings/blueprints and psecifications - Knowledge of Discus preferred - Must be proficient in the use of Microsoft Suite products.  A certain degree of creativity and flexibility in required - Knowledge of GD&T required - 5 or more years of experience in aerospace, automotive and/or other related industries

Industry: Aerospace/Defense Position: Mechanical Inspector Location: Lewisburg, TN **(additional opportunities may be available in surrounding areas)Duration: On-going contract Frequency:  approx (1 visit) per week.    Seeking an experienced Aerospace Quality Source Inspector near Lewisburg, TN for immediate supplier source requirements. Inspector shall travel to local supplier facilities to perform visual and dimensional inspections for manufactured parts, assemblies and/or sub-assemblies prior to shipment. Inspections will be on an as needed basis utilizing customer processes and inspection/reporting requirements. Required to report inspection results via web application. - - Candidate must own a working laptop and cell phone - Willing to utilize personal vehicle - Must be able to work in manufacturing environment and provide PPE if required by supplier - Ability to stand / sit / kneel / squat if required for inspection - Must be able to pass a background screening and Eye Exam Requirements:  - Candidate must have practical experience performing in-process and final inspections on complex machined parts, composite parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. Ideal candidate will have a minimum of five years’ experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Minimum 5 years mechanical source inspection experience. Experience must be within the last 2 years in aerospace or military/defense manufacturing. - Minimum 2 years of hands on First Article Inspection (FAI) experience to AS9102. This must be a strong knowledge and understanding. - Minimum 5 years’ experience inspecting Complex Machine Parts/Assemblies/Composite Parts. - Candidate must have a strong knowledge and understand of GD&T per ANSI Y. 14.5 - Knowledge of tight tolerance is required. - Will be working as an independent contractor (1099) if not redeployment.  - Must have LLC/DBA or able to obtain an LLC/DBA if not VTR W2 Field Employee - Must be a U.S. Citizen      

Industry: Aerospace/Defense Position: Field Quaity Engineer Location: Primary Remote 80% of the time. Potential travel may occur within regional area. Duration: 1 year Frequency: Full-time   Duties: First Article Inspection Reports (FAIR) - Using the First Article Inspection process, IAW customer procedures. - Review and disposition Supplier FAIR packaged in Net Inspect and shall ensure compliance with AS9102 industry standard requirements. - Activities to include paperwork review, over-inspection, and working with the supplier to resolve any non-compliance with the AS9102 & Customer requirements.      Self-Release (SR) Audits - Using the Product Release process IAW checklist & Customer procedures the FQE Self Releases  Audits at assigned suppliers. - Activities for completion of SR Audits will include paperwork review, working with suppliers to resolve non-compliance to the Customer and industry requirements    APQP - APQP review activities will be in accordance with Customer procedures and industry requirements at assigned suppliers. - Activities shall include review of APQP packages, artifact checklist review and disposition of APQP artifacts and Part Submission warranting support. - FQE shall work with their assigned suppliers to resolve non-compliances to the requirements.       Required Skills - Experience in reviewing Advanced Product Quality Packages (APQP) - Experience in reviewing and approving First Article Inspection Reports (FAIRs) per AS9102. - Must be proficient in Geometrical, Dimension and Tolerancing. (GD&T) - Must be able to pass a written GD&T exam with a score of 90% or higher. - Experience with layout and precision inspection techniques and the utilization of inspection hand tools to validate product conformity. - Demonstrated strong leadership, interpersonal and communication skills. - Quality engineering experience. (ASQ, CQA, or CQE certifications) - Knowledge of various manufacturing processes and product family’s - In-depth knowledge & usage of Root Cause Corrective Actions (RCCA) tools - Working knowledge of ISO9001 or equivalent Quality Management System (QMS) - Experience performing audits for customer Self Release Audit Program. - Demonstrated ability as a self-starting, self-directed individual. - Demonstrated technical knowledge of mechanical, Electro Mechanical and/or electrical products & processes. (Depends on location) - Technical knowledge of castings (Depends on location) - Technical knowledge of Circuit-Card Assemblies (Depends on location) - Proficient using common software (MS Word, Excel, Power Point, Project, etc.) - Must complete the Customer Job Qualifications requirements within 6 months. - Must be a citizen of the country that the work will be performed in - BA/BS degree in a technical discipline (i.e., engineering, manufacturing, quality assurance) with 5 years of experience in aerospace, automotive and/or other related industries - In lieu of a formal education, at least 13 years of progressive experience in aerospace, automotive and/or other related industries Desirable Skills - IPC 610 certified or trained. - Working knowledge of AS9100 Quality Management System requirements - Process control & continuous improvement tools. - ASQ, CQA, or CQE certification - RAB auditor accreditation - Experience managing projects.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense Position: Field Quaity Engineer Location: Primary Remote 80% of the time. Potential travel may occur within regional area. Duration: 1 year Frequency: Full-time Pay Range: $35/hr - $37/hr   Duties: First Article Inspection Reports (FAIR) - Using the First Article Inspection process, IAW customer procedures. - Review and disposition Supplier FAIR packaged in Net Inspect and shall ensure compliance with AS9102 industry standard requirements. - Activities to include paperwork review, over-inspection, and working with the supplier to resolve any non-compliance with the AS9102 & Customer requirements.      Self-Release (SR) Audits - Using the Product Release process IAW checklist & Customer procedures the FQE Self Releases  Audits at assigned suppliers. - Activities for completion of SR Audits will include paperwork review, working with suppliers to resolve non-compliance to the Customer and industry requirements    APQP - APQP review activities will be in accordance with Customer procedures and industry requirements at assigned suppliers. - Activities shall include review of APQP packages, artifact checklist review and disposition of APQP artifacts and Part Submission warranting support. - FQE shall work with their assigned suppliers to resolve non-compliances to the requirements.       Required Skills - Experience in reviewing Advanced Product Quality Packages (APQP) - Experience in reviewing and approving First Article Inspection Reports (FAIRs) per AS9102. - Must be proficient in Geometrical, Dimension and Tolerancing. (GD&T) - Must be able to pass a written GD&T exam with a score of 90% or higher. - Experience with layout and precision inspection techniques and the utilization of inspection hand tools to validate product conformity. - Demonstrated strong leadership, interpersonal and communication skills. - Quality engineering experience. (ASQ, CQA, or CQE certifications) - Knowledge of various manufacturing processes and product family’s - In-depth knowledge & usage of Root Cause Corrective Actions (RCCA) tools - Working knowledge of ISO9001 or equivalent Quality Management System (QMS) - Experience performing audits for customer Self Release Audit Program. - Demonstrated ability as a self-starting, self-directed individual. - Demonstrated technical knowledge of mechanical, Electro Mechanical and/or electrical products & processes. (Depends on location) - Technical knowledge of castings (Depends on location) - Technical knowledge of Circuit-Card Assemblies (Depends on location) - Proficient using common software (MS Word, Excel, Power Point, Project, etc.) - Must complete the Customer Job Qualifications requirements within 6 months. - Must be a citizen of the country that the work will be performed in - BA/BS degree in a technical discipline (i.e., engineering, manufacturing, quality assurance) with 5 years of experience in aerospace, automotive and/or other related industries - In lieu of a formal education, at least 13 years of progressive experience in aerospace, automotive and/or other related industries Desirable Skills - IPC 610 certified or trained. - Working knowledge of AS9100 Quality Management System requirements - Process control & continuous improvement tools. - ASQ, CQA, or CQE certification - RAB auditor accreditation - Experience managing projects.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”