Industry: Aerospace Position: Source Inspector Location: Tijuana, BC Mexico Duration: Until the end of 2024 Frequency: 23-30 hours a week   Job Description: - The selected candidate will provide advanced mechanical inspection using precision calibrated tools - The inspector will ensure that only conforming parts are introduced to the manufacturing floor - Utilize various inspection tools such as calipers, micrometers, thread gauges – checks dimensions/processes on parts or raw material to ensure compliance to manufacturing drawings/blueprints/specifications - Work closely with Design Engineering, Project Engineering and Manufacturing to ensure that all manufacturing and inspection activities are performed in compliance with process work documents and customer requirements - Ensures that in-process inspections are completed per engineering specifications during the production process - Perform mechanical, visual and dimensional inspections of parts using inspection hand tools. Document and facilitate disposition of any nonconforming material discovered during the inspection process - Perform Mechanical inspection using CMM (Coordinate Measuring Machine) - Perform receiving document review to ensure unbroken traceability to the respective OEM - Create “approval/reject” tags and document in the requisite databases - Perform First Article Inspections (FAI) to AS9102 guidelines ensuring the manufacturing processes are capable of producing parts that conform to specification and contractual agreements - Perform Final Inspection as required. Interface with customer portals using Net-Inspect and/or customer specified software - Perform verification/calibration of inspection, measuring and test equipment and associated tools - Perform “Internal Audits” to ensure that procedures, processes and protocols are being followed and are effective in their purpose as prescribed by the Quality Management System - Perform additional duties as assigned by the Quality Assurance Manager   Requirements: - Experience with First Article Inspections (AS9102) - Have a working knowledge of CMM inspection; interpret inspection report data as it relates to manufacturing requirements - Possess general knowledge of Aerospace Quality Systems and International Standards - Must be familiar with standard concepts, practices and procedures with regards to inspection including proficiency in the use of CMM, comparator, micrometers, thread gauges and calipers - The ability to read blue prints, check dimensional properties of parts or raw material to ensure compliance to manufacturing drawings/blueprints and specifications - Knowledge of Discus preferred - Must be proficient in the use of Microsoft Suite products.  A certain degree of creativity and flexibility in required - Knowledge of GD&T required - 5 or more years of experience in aerospace, automotive and/or other related industries  

**Seeking an Manufacturing/Quality Expertise to help facilitate Exit PPAPs in Santa Clara (Mexico City) Mexico **   Technical Requirements: - Previous experience in reviewing and validating the various elements that make up a PPAP - Demonstrate knowledge of interpreting engineering drawings, CMM data, digital product definition interpretation - Demonstrate knowledge of geometric, dimensioning and tolerance - Demonstrate evidence of product specific knowledge and experience in various mechanical assesmblies, sub assemblies and various mechanical parts - Demonstrate evidence of more than 2-years in the last 5-years of working within an engineering environment for a minimum of 3 years. Professional Requirements - Computer proficiency (Word, Excel, Outlook etc.) - Visual PPAP / FAIR    

**Seeking an Manufacturing/Quality Expertise to help facilitate Exit PPAPs in Coimbatore - India **   Technical Requirements: - Previous experience in reviewing and validating the various elements that make up a PPAP - Demonstrate knowledge of interpreting engineering drawings, CMM data, digital product definition interpretation - Demonstrate knowledge of geometric, dimensioning and tolerance - Demonstrate evidence of product specific knowledge and experience in various mechanical assesmblies, sub assemblies and various mechanical parts - Demonstrate evidence of more than 2-years in the last 5-years of working within an engineering environment for a minimum of 3 years. Professional Requirements - Computer proficiency (Word, Excel, Outlook etc.) - Visual PPAP / FAIR    

**Seeking an Manufacturing/Quality Expertise to help facilitate Exit PPAPs in AL Rushaid, Saudi Arabia**   Technical Requirements: - Previous experience in reviewing and validating the various elements that make up a PPAP - Demonstrate knowledge of interpreting engineering drawings, CMM data, digital product definition interpretation - Demonstrate knowledge of geometric, dimensioning and tolerance - Demonstrate evidence of product specific knowledge and experience in various mechanical assesmblies, sub assemblies and various mechanical parts - Demonstrate evidence of more than 2-years in the last 5-years of working within an engineering environment for a minimum of 3 years. Professional Requirements - Computer proficiency (Word, Excel, Outlook etc.) - Visual PPAP / FAIR    

Industry: Aerospace/Defense Position: First Article Inspector Location: Tacoma, WA area Duration: 4 Months Frequency: 40 hours a week (Full-Time) Pay Range: $45.00 - $50.00/hour   ** FAI Inspector ***   Seeking two (2) Aerospace First Article Inspectors full-time for 4 months in the Tacoma, WA area   Job Details: - The Senior Quality Inspector shall perform First Article Inspections (FAIs) in accordance with Aerospace Standard AS9102. - The candidate will ensure the accuracy and completeness of all engineering design requirements records on the AS9102 forms. - Performing First Article Gap Analysis, identify and report discrepancies - Confirmation that the First Article Inspection Record (FAIR) is accurate and completed for a part number or assembly and that all part, product, and characteristic accountability aspects are addressed prior to approval. Requirements: - First article inspector must have knowledge and practical experience of the AS9102 standard. - This should include at least 2 year of experience inspecting all aspects of first article packages in accordance with the standard, along with at least 5 years in quality. - Previous experience in FAIR review / sign-off - Strong background in manufacturing in the aerospace or military / defense industries required. - Practical experience inspecting aerospace components and assemblies is necessary as well as knowledge of applicable industry standards - Inspector must be able to read and understand Purchasing documents, specifications, shop planning, drawings, 3D models and other technical instructions. - Good communication skills, both written and oral. - Inspector must have proficient computer skills using Microsoft Word and Excel. - Experience with Net-Inspect software is a plus, but not required.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, disability status, protected veteran status, or any other characteristic protected by law.”

  Position: CMM Programmer / Operator / Inspector   Location:  Mountain View, CA   Duration:  6 month contract (minimum with extensions per need of the project)   Frequency: 9x80 schedule (week 1 M-F; 9 hours = 45 hours / week 2 M-W; 9 hours, Thurs 8 hours, Friday off = 35 hours).    Compensation:  $37-39 per hour (D.O.E.)   Job Description: The quality inspector to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies.  Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications.  The inspector will be required to report inspection accept / reject information directly to the customer via web application.  Requirements: Candidate must have practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard.  Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers.  Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required.  Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. Candidate should be computer savvy and own a laptop for this assignment.    Required Skillset of Individual: - Ability to program and operate CMM equipment (PCDMIS), including traditional CMM coordinate machine and portable CMM arm with minimal to no supervision. - Parts will be composite and metallic - Ability to create and run programs for CMM equipment using PC-DMIS software. - Attention to detail to support organizing CMM Programs in a logical, methodical manner. - Understanding of developing  process documentation. - Ability to initiate Nonconformance Document when defects are found. - Ability to collaborate with others to work through problems encountered. - Ability to update work orders, as required, to account for work performed. - Team player attitude with an ability to collaborate with multiple functions and peers. - In-depth level of GD&T concepts - Ability to interpret Blueprints and translate them into CMM programs Bonus Skill: - Experience using the Hexagon Absolute Arm RA8 v3 - Experience using the Hexagon CMM SF 7.10.7 Relocation is not available   We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, disability status, protected veteran status, or any other characteristic protected by law

Industry: Aerospace/Defense Position: Source Inspection Location: Pompano Beach, FL Frequency – 1 visits per Week 4 hours each Duration: ASAP-3/13/2025     Job Description: - Verifies completed product to purchase order, drawing and associated specifications. - Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. - Knowledge of standard inspection tools to include CMMs is required. - Previous machine shop experience, final inspections and Aerospace products.  Skills Requirement: - Attention to Detail - Strong communication skills - Organized - Able to operate computers. - General electrical knowledge Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - High School Diploma - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA      

Industry: Aerospace/Defense Position: Probitas AS9100 Aerospace Auditor Location:  Various Supplier locations Duration: On-going Frequency: 1-2 audits for year - 1099     Job Description: - The auditor will perform examination of the Quality Management System (QMS) and its various elements and procedures in order to ensure its effectiveness, including observing evidence of continuous improvement.  - Perform QMS audits for various suppliers.  - The ability to identify major findings, minor findings, observations, and report information directly to the customer via web application.  - Experience initiating, reviewing and approval of corrective action responses and evaluate effectiveness of implemented corrective action(s).   Requirements: -  Probitas AS9100/AS9120 Certfied QMS Auditor required. - Valid certification is also required. - Successful completion of at least five external audits in the past year to the AS9100 standard.  - A strong background in the aerospace manufacturing industry. - Good writing and communication skills. - Must have proficient computer skills using Microsoft Word and Excel. - Will be working as an independent contractor (1099)   - Must have LLC/DBA or able to obtain an LLC/DBA    

Industry: Aerospace/Defense Position: Source Inspector Location: Lexington,NE Frequency – 4 hrs per Month- part-time - 1099. Duration: 1 year   Job Description: - Verifies completed product to purchase order, drawing and associated specifications. - Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. - Knowledge of standard inspection tools to include CMMs is required. - Previous machine shop experience, final inspections and Aerospace products. Skills Requirement: - - Attention to Detail - Strong communication skills - In process and Final Inspection - Organized - Able to operate computers  Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - General Mechanical - General Chemical Film experience  - Will be working as an independent contractor (1099)   - Must have LLC/DBA or able to obtain an LLC/DBA        

Industry: Aerospace/Defense Position: Source Inspection Location: New Bedford MA Duration: 1 Year Frequency: 8-hrs per Month– Part Time – Contract Assignment - 1099.   Position Overview: - The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application.  Skills and Abilities: - Strong Attention to Detail - Coordinate quality activities with customers and suppliers. - General Mechanical - General Electrical  Required Qualifications: - Mechanical Knowledge - FAI experience - IPC-6012 Experience  - Will be working as an independent contractor (1099)   - Must have LLC/DBA or able to obtain an LLC/DBA    

Industry: Aerospace/Defense Position: Mechanical Inspector Location: Brattleboro VT and surrounding areasDuration: On-going contract Frequency:  approx 8-16/hrs per week -   Job Description: - The quality inspector - Mechanical, shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Requirements: - Candidate must have 3 years practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers, calipers, pin gauges, thread gauges height gauges, CMM, and hardness testers. - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. - Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Candidate should be computer savvy and own a laptop for this assignment. - Will be working as an independent contractor (1099). - Must be a U.S. Citizen      

Industry: Aerospace/Defense Position: Mechanical Inspector Location: Cedar Rapids, IA and surrounding areas Duration: On-going contract Frequency:  approx 8-16/hrs per week - 1099   Job Description: - The quality inspector - Mechanical, shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application.  Requirements: - Candidate must have 3 years practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers, calipers, pin gauges, thread gauges height gauges, CMM, and hardness testers. - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. - Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Candidate should be computer savvy and own a laptop for this assignment. - Will be working as an independent contractor (1099)   - Must have LLC/DBA or able to obtain an LLC/DBA - Must be a U.S. Citizen      

Industry: Aerospace/Defense Position: Mechanical Source Inspector Location: Laconia, NH and Lebanon, NH Duration: On-going contract Frequency: 2-4 visits per month (may fluctuate depending on supplier demand) - 1099   Seeking an experienced Aerospace mechanical source inspector in New Hampshire to support in Lebanon and Laconia. Work is part-time/on-demand ( averaging 2-4 visits per month ). May fluctuate depending on supplier activity on an on-going basis   Job Description: - The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application. Requirements: - Candidate must have practical experience performing in-process and final inspections on complex machined parts, composite parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. Ideal candidate will have a minimum of five years’ experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Candidate should be computer savvy and own a laptop for this assignment. - Minimum 5 years mechanical source inspection experience. Experience must be within the last 2 years in aerospace or military / defense manufacturing. - Minimum 2 years of hands on first article inspection (FAI) experience to AS9102. This must be a strong knowledge and understanding. - Minimum 5 years’ experience inspecting Complex Machine Parts/Assemblies/Composite Parts. - Candidate must have a strong knowledge and understand of GD&T per ANSI Y. 14.5 - Knowledge of tight tolerance is required. - Candidate must have mobile phone availability and their own laptop, with e-mail and internet access, to bring on site to the supplier location. - Strong computer skills. Source inspection information is input into the customer's system in SAP. - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA      

Industry: Aerospace/Defense Position: Technical Subcontractor Production 2 Location: Huntington Beach, California Frequency – 30-40 Hours per Week - W2 Duration: On-Going Pay Rate: $52.00/hr-$59.00/hr   Job Description: The work scope of this position will require the candidate to live in/near 50 miles radius of LA areas.  There will be occasional travel to other locations in LA or the surrounding states may be required. This is a Technical Subcontract Management (TSM) field support position. The TSM will be responsible for providing onsite support at major system and airframe suppliers primarily located in/around Chicago.  Approximately 90% of the TSMs time will be spent onsite at a customer’s supplier facility.   A TSM is a member of the Supply Chain Management (SCM) team that the customer uses to minimize disruptions to the supply chain by providing “in the field” oversight of supplier execution. As a project manager overseeing multiple customer Suppliers, daily activities will include working with supplier personnel to prioritize components through manufacturing, validating the status of the deliverable parts and providing detailed status to customer procurement, preparing plans to reduce/prevent shortages, identifying risks in the supply chain, and developing risk mitigation plans to minimize the potential impact to the customer.   Candidates should fully understand the production processes as they relate to aircraft systems components and avionics equipment, machined part fabrication, tooling fabrication, and lean manufacturing. The candidate should be a self-starter that is capable of analyzing supplier processes and developing improvement plans in collaboration with personnel from both the supplier and the customer. The candidate will regularly collaborate across multiple functions (within customer and at the supplier facility), including production, procurement, quality, and engineering, to expedite parts/assemblies that are required to support each of the customer Lines of Business (LOB).   The success of the person in this position will greatly depend on his/her ability to communicate clearly and effectively with supplier personnel at varying levels of an organization. The candidate should have strong interpersonal skills and be able to build relationships quickly with multiple stakeholders.  Skills Requirement: - Attention to Detail - Strong communication skills - In-process and Final Inspection - Highly Organized - Able to operate computers Requirements: - 5+ Years experience as a Technical Subcontract Manager - 5+ years of Supply Chain Management - 3+ years of the Aircraft Production Process encompassing all areas of the Customer’s Lines of Business - The candidate must live in/near 50 miles radius of LA area - Must be open to local travel and occasionally to neighboring locations   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense Position: Technical Subcontractor Production 2 Location: Los Angeles,CA Frequency – 30-40 Hours per Week - W2 Duration: On-Going Pay Rate: $52.00/hr-$59.00/hr   Job Description: The work scope of this position will require the candidate to live in/near 50 miles radius of LA areas.  There will be occasional travel to other locations in LA or the surrounding states may be required. This is a Technical Subcontract Management (TSM) field support position. The TSM will be responsible for providing onsite support at major system and airframe suppliers primarily located in/around Chicago.  Approximately 90% of the TSMs time will be spent onsite at a customer’s supplier facility.   A TSM is a member of the Supply Chain Management (SCM) team that the customer uses to minimize disruptions to the supply chain by providing “in the field” oversight of supplier execution. As a project manager overseeing multiple customer Suppliers, daily activities will include working with supplier personnel to prioritize components through manufacturing, validating the status of the deliverable parts and providing detailed status to customer procurement, preparing plans to reduce/prevent shortages, identifying risks in the supply chain, and developing risk mitigation plans to minimize the potential impact to the customer.   Candidates should fully understand the production processes as they relate to aircraft systems components and avionics equipment, machined part fabrication, tooling fabrication, and lean manufacturing. The candidate should be a self-starter that is capable of analyzing supplier processes and developing improvement plans in collaboration with personnel from both the supplier and the customer. The candidate will regularly collaborate across multiple functions (within customer and at the supplier facility), including production, procurement, quality, and engineering, to expedite parts/assemblies that are required to support each of the customer Lines of Business (LOB).   The success of the person in this position will greatly depend on his/her ability to communicate clearly and effectively with supplier personnel at varying levels of an organization. The candidate should have strong interpersonal skills and be able to build relationships quickly with multiple stakeholders.  Skills Requirement: - Attention to Detail - Strong communication skills - In-process and Final Inspection - Highly Organized - Able to operate computers Requirements: - 5+ Years experience as a Technical Subcontract Manager - 5+ years of Supply Chain Management - 3+ years of the Aircraft Production Process encompassing all areas of the Customer’s Lines of Business - The candidate must live in/near 50 miles radius of LA area - Must be open to local travel and occasionally to neighboring locations   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense Position: FAI Reviewer - Senior Level Location: Irving, Texas / Relocation not available. Job requires onsite presence in Irving, TX.  Duration: On-going contract Frequency: 40/hrs per week - full-time - W2  Pay Range: $40.00/hr   Job Summary: - The Senior Quality Inspector shall perform First Article Inspections (FAIs) in accordance with Aerospace Standard AS9102. - The candidate will be reviewing FAIs packages in office and will ensure the accuracy and completeness of all engineering design requirements records on the AS9102 forms. - Confirmation that the First Article Inspection Record (FAIR) is accurate and completed for a part number or assembly and that all part, product, and characteristic accountability aspects are addressed prior to approval.   Requirements: - Candidate must have knowledge and practical experience of the AS9102 standard. - This should include at least 4-5 years of experience inspecting all aspects of first article packages in accordance with the standard, along with at least 5 years in quality. - Experience of working within an engineering environment for a min of 3 years.  - Strong background in manufacturing in the aerospace or military / defense industries required. - Practical experience inspecting aerospace components and assemblies is necessary as well as knowledge of applicable industry standards is highly desired. - Must understand Purchasing documents, specifications, shop planning, drawings, 3D models and other technical instructions. - Demonstrate knowledge of interpreting engineering drawings, CMM data, digital product definition interpretation - Demonstrate evidence of product specific knowledge and experience as required  - Good communication skills, both written and oral. - Must have proficient computer skills using Microsoft Word and Excel. - Experience with Net-Inspect software   Testing Requirements:  - AS9102 REV B Assessment     “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense Position: Mechanical Inspector Location: Frankfort, NY Frequency – 48 Hours per Month - 1099 Duration: 2 Months  (2/14/2024-4/13/2024)    Job Description: - Verifies completed product to purchase order, drawing and associated specifications. - Ability to adequately inspect Aerospace level electronic components and assemblies. - Includes CCA or PWB for industry specifications such as J-STD-001 and IPC.   Skills Requirement: - Attention to Detail - Strong communication skills - In process and Final Inspection - Organized - Able to operate computers - Wire harnesses and connectors Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - IPC-6010 - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA  

Industry: Aerospace/Defense Position: Source Inspection Location: Liberty Lake, WA Frequency – 12 visits per Year 8 hours each - 1099 Duration: ASAP-2/1/2025     Job Description: - Verifies completed product to purchase order, drawing and associated specifications. - Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. - Knowledge of standard inspection tools to include CMMs is required. - Previous machine shop experience, final inspections and Aerospace products. - Verifies completed product to purchase order, drawing and associated specifications. - Ability to adequately inspect Aerospace level electronic components and assemblies. - Includes CCA or PWB for industry specifications such as J-STD-001 and IPC. - Verifies completed product to purchase order, drawing and associated specifications. - Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. - Knowledge of standard inspection tools to include CMMs is required. - Previous machine shop experience, final inspections and Aerospace products.   Skills Requirement: - Attention to Detail - Strong communication skills - Organized - Able to operate computers. - General electrical knowledge  Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - High School Diploma - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - General mechanical and electrical experience - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA      

Industry: Aerospace/Defense Position: Source Inspection Location: Anmoore, WV Duration: 1 year Frequency: 8-hrs per week – Part Time – Contract Assignment - 1099.   Position Overview:   The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Skills and Abilities: - Strong Attention to Detail - Coordinate quality activities with customers and suppliers. - Precise machining knowledge Required Qualifications: - Mechanical Knowledge - FAI experience  Requirement: - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA  

Industry: Aerospace/Defense Position: Source Inspection Location: Albuquerque,NM Duration: 1 year Frequency: 8-hrs per Week– Part Time – Contract Assignment - 1099.   Position Overview: - The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Skills and Abilities: - Strong Attention to Detail - Coordinate quality activities with customers and suppliers. - Precise machining knowledge Required Qualifications: - Mechanical Knowledge - FAI experience Requirement:  - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA