Industury: Aerospace Position:Supplier Quality Delivery Improvement Specialist Location: Rochester, MN Duration: On-going contract Frequency: Full-time - W2 Pay Range: $50/hr - $52/hr Must be a US Citizen     Duties: - Develop positive relationships and work closely with quality leaders to manage, implement and track supplier improvements. - Support process and product audits for proactive risk management. - Support authorities (FAA, EASA, CAAC) and customer audits. - Support and participate in PFMEA activities, Work Instruction Improvements, and Control Plan effectiveness with suppliers. - Ensure supplier compliance while driving systematic problem solving and process improvement plans to deliver performance. - Support and evaluate prospective supplier Quality System - Support and evaluate procedures for compliance to contractual and regulatory requirements - Support the Expedite of product to meet customer need - Monitor supplier Quality metrics associated with supplier capability, trends and related production improvement efforts - Drive Root Cause Corrective Action (RCCA) investigations to prevent defects.   Required Experience and Skills: - 5 or more years of experience in aerospace, automotive and/or other related industries - The position requires breadth of technical experience across products, electrical and mechanical depending on specific supplier assignments, work directly with suppliers daily, influencing / working closely with the sourcing commodity leadership teams, and Quality. - The successful candidate should be able to effectively communicate with senior management, have a big picture strategic mindset, handle multiple priorities, influence, and solve complex problems. - Must be a US Citizen. - Experience using basic Six Sigma techniques - Experience with project management and Kaizen facilitation. - Ability to interface effectively with all levels of leadership.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”  

Industry: Aerospace/Defense Position: Mechanical Source Inspector   Location: Titusville, FL Duration: Ongoing Contract Frequency: On-demand / 4 hours    Job Description: - Perform mechanical inspection using precision measuring devices/instruments at supplier’s facility to verify compliance to drawings, standards/specifications and other PO requirements - Verify material certifications against PO requirements, part marking where required and visually inspect for obvious defects/ damage Requirements: - Minimum 5 years of precision mechanical inspection experience is required - Strong understanding of, and experience with, ANSI Y 14.5 GD&T - Ability to read and interpret drawings and basic computer skills are a must - Experience working with tight tolerances - Hands-on mechanical inspection experience - Must have experience working with Mil-standards - Previous source inspection experience

Industry: Aerospace/Defense Position: Electromechanical Inspector Location: Chandler, AZ Duration: On-going contract Frequency: 20 - 40/hrs per week - depending on supplier requirements Pay Rate: $35.00/hr-$38.50/hr   Seeking an Aerospace Electromechanical Inspector available to support Chandler, Arizona and surrounding areas (approx 120 miles) 20-40/hrs per week depending on supplier requirements.   Job Description: - The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and/or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept/reject information directly to the customer via web application. Requirements: - Inspector must have practical experience performing in-process and final inspections on machined parts, assemblies, and/ or sub-assemblies. - CCA inspection experience is a must have. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. - Must have the ability to read/interpret engineering drawings and Purchase Orders (POs). The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge of standards J-STD and IPC-A-610 are required. - Ideal candidate will have a minimum of 10 years experience performing inspections in aerospace or military/defense manufacturing with proficiency using Microsoft Word and Excel. - Must have a laptop and cell phone. - You must have a High School Diploma or equivalent. - Preferred candidate must be open to travel up to 120 miles around Chandler AZ “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law. Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Surveyor/ Auditor   Currently seeking a special process surveyor/ auditor to support at supplier locations regionally (Distances May Vary). Please see below for further details.   The Surveyor/Auditor will perform an examination of established methods, instructions, and work flows for special processes - validating the reliability of the process per customer or industry specification(s), including incorporation of maintenance programs for product equipment, material handling, and housekeeping practices in the work area. This will be an on going contract supporting throughout the year. Please see below for further details.   Experience Requirements: - A strong manufacturing background with practical experience performing special process audits preferably in an ISO or AS9100 setting - Familiarity with NADCAP and respective special process standards and specifications is required - Ability to identify nonconformance / discrepancies and report information directly to the customer via web application - Must have documented auditing experience within the body of the candidate resume - The Customer is particularly interested in resumes that demonstrate experience in the following special process disciplines. Resumes that demonstrate knowledge in any (1) or more of these areas will be considered: - Chemical Processing - Heat Treatment - Welding - Brazing - NDT (All Disciplines Welcome) - Forgings - Castings - Bonding - Printed Wiring Boards (PWB) - Electronic Soldering - Recognized auditor certification (RAB or ASQ Certified Quality Auditor) is a plus - Must have proficient computer skills using with Microsoft Word, Excel, and PowerPoint - Must be proficient navigating the internet and associated websites - Must have a laptop or personal computer and cell phone    

Surveyor/ Auditor   Currently seeking a special process surveyor/ auditor to support at supplier locations regionally (Distances May Vary). Please see below for further details.   The Surveyor/Auditor will perform an examination of established methods, instructions, and work flows for special processes - validating the reliability of the process per customer or industry specification(s), including incorporation of maintenance programs for product equipment, material handling, and housekeeping practices in the work area. This will be an on going contract supporting throughout the year. Please see below for further details.   Experience Requirements: - A strong manufacturing background with practical experience performing special process audits preferably in an ISO or AS9100 setting - Familiarity with NADCAP and respective special process standards and specifications is required - Ability to identify nonconformance / discrepancies and report information directly to the customer via web application - Must have documented auditing experience within the body of the candidate resume - The Customer is particularly interested in resumes that demonstrate experience in the following special process disciplines. Resumes that demonstrate knowledge in any (1) or more of these areas will be considered: - Chemical Processing - Heat Treatment - Welding - Brazing - NDT (All Disciplines Welcome) - Forgings - Castings - Bonding - Printed Wiring Boards (PWB) - Electronic Soldering - Recognized auditor certification (RAB or ASQ Certified Quality Auditor) is a plus - Must have proficient computer skills using with Microsoft Word, Excel, and PowerPoint - Must be proficient navigating the internet and associated websites - Must have a laptop or personal computer and cell phone    

Industry: Aerospace/Defense Position: Mechanical Inspector Location: Memphis TN and surrounding areas Duration: On-going contract Frequency:  approx 8-16/hrs per week - 1099   Job Description: - The quality inspector - Mechanical, shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application.  Requirements: - Candidate must have 3 years practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers, calipers, pin gauges, thread gauges height gauges, CMM, and hardness testers. - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. - Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Candidate should be computer savvy and own a laptop for this assignment. - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA - Must be a U.S. Citizen      

Industry: Aerospace/Defense Position: Mechanical Inspector Location: Binghampton, NY and surrounding areas Duration: On-going contract Frequency:  approx 8-16/hrs per week - 1099   Job Description: - The quality inspector - Mechanical, shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Requirements: - Candidate must have 3 years practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers, calipers, pin gauges, thread gauges height gauges, CMM, and hardness testers. - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. - Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Candidate should be computer savvy and own a laptop for this assignment. - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA - Must be a U.S. Citizen      

Industry: Aerospace/DefensePosition: FAI Reviewer - Senior LevelLocation: Irving, Texas / Relocation not available. Job requires onsite presence in Irving, TX. Duration: On-going contractFrequency: 40/hrs per week - full-time - W2  Pay Range: $40.00/hr   Job Summary: - The Senior Quality Inspector shall perform First Article Inspections (FAIs) in accordance with Aerospace Standard AS9102. - The candidate will be reviewing FAIs packages in office and will ensure the accuracy and completeness of all engineering design requirements records on the AS9102 forms. - Confirmation that the First Article Inspection Record (FAIR) is accurate and completed for a part number or assembly and that all part, product, and characteristic accountability aspects are addressed prior to approval.   Requirements: - Candidate must have knowledge and practical experience of the AS9102 standard. - This should include at least 4-5 years of experience inspecting all aspects of first article packages in accordance with the standard, along with at least 5 years in quality. - Experience of working within an engineering environment for a min of 3 years.  - Strong background in manufacturing in the aerospace or military / defense industries required. - Practical experience inspecting aerospace components and assemblies is necessary as well as knowledge of applicable industry standards is highly desired. - Must understand Purchasing documents, specifications, shop planning, drawings, 3D models and other technical instructions. - Demonstrate knowledge of interpreting engineering drawings, CMM data, digital product definition interpretation - Demonstrate evidence of product specific knowledge and experience as required  - Good communication skills, both written and oral. - Must have proficient computer skills using Microsoft Word and Excel. - Experience with Net-Inspect software   Testing Requirements:  - AS9102 REV B Assessment     “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Job Description: The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Requirements: Candidate must have practical experience performing in-process and final inspections on complex mechanical parts, assemblies, and / or sub-assemblies. The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. Experience performing First Article Inspections (FAIs) in accordance to the AS9102 Rev. B standard and knowledge is required. Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. Candidate should be computer savvy and own a laptop for this assignment. Will be working as an independent contractor (1099).  

Industry: Aerospace/Defense Position: Mechanical Inspector Location: Rock Hill, SCDuration: On-going contract Frequency: 8/hrs per week - part-time - 1099   Job Description: - The quality inspector - Mechanical, shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application.  Requirements: - Candidate must have 3 years practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers, calipers, pin gauges, thread gauges height gauges, CMM, and hardness testers. - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. - Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Candidate should be computer savvy and own a laptop for this assignment. - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA - Must be a U.S. Citizen      

Industry: Aerospace/Defense Position: Source Inspector Location: Scottsdale, AZ Frequency: 8hrs per week - part-time - 1099. Duration: 6 month contract / posssibility of extension   Job Description: Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level electronic components and assemblies. Includes CCA or PWB for industry specifications such as J-STD-001 and IPC. Previous   Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - NASA Certification NASA-Std-8739.1 and 8739.6   Skills Requirement: - Attention to Detail - Strong communication skills - In process and Final Inspection - Organized - Able to operate computers    

Industry: Aerospace/Defense Position: Source Inspector Location: Kalispell, Montana Duration: On-going contact Frequency: 1 visit a month / approx 8 hour day - 1099   Customer is open to traveling someone in for each visit.   With the following responsibilities:   - Monitor the production of supplier's product. - Source inspection on supplier product prior to shipping. - Provide status updates and inspection results to customer as requested   Qualifications: - Should have 10+ years experience working with electrical commodities such as wires, cable, harnesses, printed circuit boards/connectors, . - Should have hands on inspection experience and be knowledgeable of defense requirements. - High School Diploma - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - Will be working as an independent contractor (1099)   - Must have LLC/DBA or able to obtain an LLC/DBA   Certification Required:    - IPC-620  

Industry: Aerospace/Defense   Position: Source Inspector   Location: Alpharetta, Georgia   Duration: On-going contract   Frequency: 8/hrs per week - part-time   This person will be a resident source person there with the following responsibilities:   - Monitor the production of supplier's product. - Source inspection on supplier product prior to shipping. - Provide status updates and inspection results to customer as requested   Qualifications:   -      Should have 10+ years experience working with electrical commodities such as printed circuit boards/connectors, and display systems. -     Should have hands on inspection experience and be knowledgeable of defense requirements.     Certification Preferred but not Required    - IPC A 610 or IPC-620  

Industry: Aerospace/Defense Position: Technical Subcontractor Production 2 Location: Chicago, IL Frequency – 30 - 40 Hours per Week - W2 Duration: On-Going Pay Rate: $52.00 - $59.00   Job Description: - The work scope of this position will require the candidate to live in/near 50 miles radius of (Chicago, IL) areas.  - There will be occasional travel to other locations in (St. Louis and Chicago) or the surrounding states may be required. - This is a Technical Subcontract Management (TSM) field support position. - The TSM will be responsible for providing onsite support at major system and airframe suppliers primarily located in/around Chicago.   - Approximately 90% of the TSMs time will be spent onsite at a customer’s supplier facility.   A TSM is a member of the Supply Chain Management (SCM) team that the customer uses to minimize disruptions to the supply chain by providing “in the field” oversight of supplier execution. As a project manager overseeing multiple customer Suppliers, daily activities will include working with supplier personnel to prioritize components through manufacturing, validating the status of the deliverable parts and providing detailed status to customer procurement, preparing plans to reduce/prevent shortages, identifying risks in the supply chain, and developing risk mitigation plans to minimize the potential impact to the customer.   Candidates should fully understand the production processes as they relate to aircraft systems components and avionics equipment, machined part fabrication, tooling fabrication, and lean manufacturing. The candidate should be a self-starter that is capable of analyzing supplier processes and developing improvement plans in collaboration with personnel from both the supplier and the customer. The candidate will regularly collaborate across multiple functions (within customer and at the supplier facility), including production, procurement, quality, and engineering, to expedite parts/assemblies that are required to support each of the customer Lines of Business (LOB).   The success of the person in this position will greatly depend on his/her ability to communicate clearly and effectively with supplier personnel at varying levels of an organization. The candidate should have strong interpersonal skills and be able to build relationships quickly with multiple stakeholders. Requirements: - Candidates must have 5+ years experience as a Technical Subcontract Manager - Candidates must have 5+ years of Supply Chain Management - Candidates must have 3+ years of the Aircraft Production Process encompassing all areas of the Customer’s Lines of Business - Candidate must live in/near 50 miles radius of (Chicago, IL) areas  - Candidate must be open to local travel and occasionally to neighboring locations - Candidate must be a US Citizen  Skills Requirement: - Attention to Detail - Strong communication skills - In-process and Final Inspection - Highly Organized - Able to operate computers   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Position: Auditor Location: Various Duration: On-going contract Frequency: 8-10 hours/week Pay Range: $45.00-$55.00 per hour   Position Overview:   The auditor will perform examination of the Quality Management System (QMS), DPD (Digital Product Definition) and its various elements and procedures in order to ensure its effectiveness, including observing evidence of continuous improvement.  Perform AS9003 audits for various suppliers.  The ability to identify major findings, minor findings, observations, and report information directly to the customer via web application.  Experience initiating, reviewing, and approval of corrective action responses and evaluate the effectiveness of implemented corrective action(s).   Skills and Abilities: - A strong background in the aerospace manufacturing industry. - Good writing and communication skills. - Good writing and communication skills. Must have proficient computer skills using Microsoft Word and Excel. - Comfortable working as an independent contractor (1099). Required Qualifications: - A 40 Hour AS91XX auditor/lead auditor training RABQSA/Exemplar Global or IRCA approved training provider certification is required. - Must have 3D model ideally CATIA v5 and Configuration Management expereience. - Must have CMM or CNC machine experience     Preferred Qualifications:  - A recognized auditor Certification (RAB or ASQ Certified Quality Auditor) a plus - Prefer auditor who worked to Boeing' DPD (Digital Product Definition) audit.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense Position: Source Inspection 2 Location: Palmdale, CA Duration: Indefinate Frequency: 30-40-hrs per week – Full Time – W2 Assignment Pay Range: $37.00-$42.00   Position Overview: - The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application. - Resource must be able to work Saturday and be on-call occasionally. - Schedule is 3 day shifts and 2 night shifts a week   Skills and Abilities: - Strong Attention to Detail - Coordinate quality activities with customers and suppliers. - Precise machining knowledge Required Qualifications: - Mechanical Knowledge - FAI experience   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Position: Quality Inspector Location: Santiago, Dominical Republic Duration: 6 months (possible extension per customer need) Frequency: 10 Hours per week     Job Description: - The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Requirements: - Candidate must have practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. - Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Candidate should be computer savvy and own a laptop for this assignment. - Will be working as an independent contractor (1099).  

Industry: Defense  Position: Source Inspector  Location: Dayton/Cincinnati/Louisville Area  Duration: 6 months  Frequency: 8-16 hours/week Pay: $28-$32/hour based on qualifications   Job Description: - The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies.  - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications.  - The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Requirements: - Candidate must have practical experience performing in-process and final inspections on machined parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard.  - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers.  Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard is a plus -  Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel.  - Will be covering suppliers in the Cincinnati/Dayton, OH region as well as Louisville, KY.  Open to covering suppliers in surrounding states is a plus -     “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense Position: Source Inspector Location: Fort Totten, ND Frequency –8 Hours per Week - 1099 Duration: 1 Year   Job Description: Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. Knowledge of standard inspection tools to include CMMs is required. Previous machine shop experience, final inspections and Aerospace products.   Skills Requirement: - Attention to Detail - Strong communication skills - In process and Final Inspection - Organized - Able to operate computers Requirements: - 5+ Years experience in Aerospace Production Management - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - Will be working as an independent contractor (1099)   - Must have LLC/DBA or able to obtain an LLC/DBA      

Industry: Aerospace/Defense Position: Source Inspector Location: Fort Totten, ND Frequency – 8 Hours per Week - 1099 Duration: 1 Year (Back-Up)   Job Description: - Verifies completed product to purchase order, drawing and associated specifications. - Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. - Knowledge of standard inspection tools to include CMMs is required. - Previous machine shop experience, final inspections and Aerospace products.   Skills Requirement: - Attention to Detail - Strong communication skills - In process and Final Inspection - Organized - Able to operate computers Requirements: - 5+ Years experience in Aerospace Production Management - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - Will be working as an independent contractor (1099)   - Must have LLC/DBA or able to obtain an LLC/DBA