Click column header to sort
Industry: Aerospace/Defense
Position: Source Inspector
Location: Kalispell, Montana
Duration: On-going contact
Frequency: 1 visit a month / approx 8 hour day - 1099
Customer is open to traveling someone in for each visit.
With the following responsibilities:
- Monitor the production of supplier's product.
- Source inspection on supplier product prior to shipping.
- Provide status updates and inspection results to customer as requested
Qualifications:
- Should have 10+ years experience working with electrical commodities such as wires, cable, harnesses, printed circuit boards/connectors, .
- Should have hands on inspection experience and be knowledgeable of defense requirements.
- High School Diploma
- Must be a US Citizen
- 5+ years’ experience in FAI and AS9102
- Will be working as an independent contractor (1099)
- Must have LLC/DBA or able to obtain an LLC/DBA
Certification Required:
- IPC-620
Industry: Aerospace/Defense
Position: Source Inspector
Location: Alpharetta, Georgia
Duration: On-going contract
Frequency: 8/hrs per week - part-time
This person will be a resident source person there with the following responsibilities:
- Monitor the production of supplier's product.
- Source inspection on supplier product prior to shipping.
- Provide status updates and inspection results to customer as requested
Qualifications:
- Should have 10+ years experience working with electrical commodities such as printed circuit boards/connectors, and display systems.
- Should have hands on inspection experience and be knowledgeable of defense requirements.
Certification Preferred but not Required
- IPC A 610 or IPC-620
Industry: Aerospace/Defense
Position: Technical Subcontractor Production 2
Location: Chicago, IL
Frequency – 30 - 40 Hours per Week - W2
Duration: On-Going
Pay Rate: $46.00 - $61.00
Job Description:
- The work scope of this position will require the candidate to live in/near 50 miles radius of (Chicago, IL) areas.
- There will be occasional travel to other locations in (St. Louis and Chicago) or the surrounding states may be required.
- This is a Technical Subcontract Management (TSM) field support position.
- The TSM will be responsible for providing onsite support at major system and airframe suppliers primarily located in/around Chicago.
- Approximately 90% of the TSMs time will be spent onsite at a customer’s supplier facility.
A TSM is a member of the Supply Chain Management (SCM) team that the customer uses to minimize disruptions to the supply chain by providing “in the field” oversight of supplier execution. As a project manager overseeing multiple customer Suppliers, daily activities will include working with supplier personnel to prioritize components through manufacturing, validating the status of the deliverable parts and providing detailed status to customer procurement, preparing plans to reduce/prevent shortages, identifying risks in the supply chain, and developing risk mitigation plans to minimize the potential impact to the customer.
Candidates should fully understand the production processes as they relate to aircraft systems components and avionics equipment, machined part fabrication, tooling fabrication, and lean manufacturing. The candidate should be a self-starter that is capable of analyzing supplier processes and developing improvement plans in collaboration with personnel from both the supplier and the customer. The candidate will regularly collaborate across multiple functions (within customer and at the supplier facility), including production, procurement, quality, and engineering, to expedite parts/assemblies that are required to support each of the customer Lines of Business (LOB).
The success of the person in this position will greatly depend on his/her ability to communicate clearly and effectively with supplier personnel at varying levels of an organization. The candidate should have strong interpersonal skills and be able to build relationships quickly with multiple stakeholders.
Requirements:
- Candidates must have 5+ years experience as a Technical Subcontract Manager
- Candidates must have 5+ years of Supply Chain Management
- Candidates must have 3+ years of the Aircraft Production Process encompassing all areas of the Customer’s Lines of Business
- Candidate must live in/near 50 miles radius of (Chicago, IL) areas
- Candidate must be open to local travel and occasionally to neighboring locations
- Candidate must be a US Citizen
Skills Requirement:
- Attention to Detail
- Strong communication skills
- In-process and Final Inspection
- Highly Organized
- Able to operate computers
“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law. Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”
Position: Auditor
Location: Various
Duration: On-going contract
Frequency: 8-10 hours/week
Pay Range: $45.00-$55.00 per hour
Position Overview:
The auditor will perform examination of the Quality Management System (QMS), DPD (Digital Product Definition) and its various elements and procedures in order to ensure its effectiveness, including observing evidence of continuous improvement. Perform AS9003 audits for various suppliers. The ability to identify major findings, minor findings, observations, and report information directly to the customer via web application. Experience initiating, reviewing, and approval of corrective action responses and evaluate the effectiveness of implemented corrective action(s).
Skills and Abilities:
- A strong background in the aerospace manufacturing industry.
- Good writing and communication skills.
- Good writing and communication skills. Must have proficient computer skills using Microsoft Word and Excel.
- Comfortable working as an independent contractor (1099).
Required Qualifications:
- A 40 Hour AS91XX auditor/lead auditor training RABQSA/Exemplar Global or IRCA approved training provider certification is required.
- Must have 3D model ideally CATIA v5 and Configuration Management expereience.
- Must have CMM or CNC machine experience
Preferred Qualifications:
- A recognized auditor Certification (RAB or ASQ Certified Quality Auditor) a plus
- Prefer auditor who worked to Boeing' DPD (Digital Product Definition) audit.
“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law. Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”
Industry: Aerospace/Defense
Position: Source Inspection 2
Location: Palmdale, CA
Duration: Indefinate
Frequency: 30-40-hrs per week – Full Time – W2 Assignment
Pay Range: $37.00-$42.00
Position Overview:
- The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies.
- Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications.
- The inspector will be required to report inspection accept / reject information directly to the customer via web application.
- Resource must be able to work Saturday and be on-call occasionally.
- Schedule is 3 day shifts and 2 night shifts a week
Skills and Abilities:
- Strong Attention to Detail
- Coordinate quality activities with customers and suppliers.
- Precise machining knowledge
Required Qualifications:
- Mechanical Knowledge
- FAI experience
“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law. Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”
Position: Quality Inspector
Location: Santiago, Dominical Republic
Duration: 6 months (possible extension per customer need)
Frequency: 10 Hours per week
Job Description:
- The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies.
- Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications.
- The inspector will be required to report inspection accept / reject information directly to the customer via web application.
Requirements:
- Candidate must have practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies.
- The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard.
- Must have the ability to read / interpret engineering drawings and Purchase Orders (POs).
- The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers.
- Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required.
- Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel.
- Candidate should be computer savvy and own a laptop for this assignment.
- Will be working as an independent contractor (1099).
Industry: Defense
Position: Source Inspector
Location: Dayton/Cincinnati/Louisville Area
Duration: 6 months
Frequency: 8-16 hours/week
Pay: $28-$32/hour based on qualifications
Job Description:
- The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies.
- Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications.
- The inspector will be required to report inspection accept / reject information directly to the customer via web application.
Requirements:
- Candidate must have practical experience performing in-process and final inspections on machined parts, assemblies, and / or sub-assemblies.
- The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard.
- Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard is a plus
- Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel.
- Will be covering suppliers in the Cincinnati/Dayton, OH region as well as Louisville, KY. Open to covering suppliers in surrounding states is a plus
-
“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law. Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”
Industry: Aerospace/Defense
Position: Source Inspector
Location: Fort Totten, ND
Frequency –8 Hours per Week - 1099
Duration: 1 Year
Job Description:
Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. Knowledge of standard inspection tools to include CMMs is required. Previous machine shop experience, final inspections and Aerospace products.
Skills Requirement:
- Attention to Detail
- Strong communication skills
- In process and Final Inspection
- Organized
- Able to operate computers
Requirements:
- 5+ Years experience in Aerospace Production Management
- Must be a US Citizen
- 5+ years’ experience in FAI and AS9102
- Will be working as an independent contractor (1099)
- Must have LLC/DBA or able to obtain an LLC/DBA
Industry: Aerospace/Defense
Position: Source Inspector
Location: Fort Totten, ND
Frequency – 8 Hours per Week - 1099
Duration: 1 Year (Back-Up)
Job Description:
- Verifies completed product to purchase order, drawing and associated specifications.
- Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications.
- Knowledge of standard inspection tools to include CMMs is required.
- Previous machine shop experience, final inspections and Aerospace products.
Skills Requirement:
- Attention to Detail
- Strong communication skills
- In process and Final Inspection
- Organized
- Able to operate computers
Requirements:
- 5+ Years experience in Aerospace Production Management
- Must be a US Citizen
- 5+ years’ experience in FAI and AS9102
- Will be working as an independent contractor (1099)
- Must have LLC/DBA or able to obtain an LLC/DBA
Industry: Aerospace/Defense
Position: Source Inspector
Location: North Miami, Florida
Duration: 3 month contract
Frequency: up to 40/hrs per week - full-time - W2
Pay rate: $28.00 to $30.00 per hour
Job Description:
- Perform source inspections required by the documentation.
- Ensure parts are conformed to the engineering requirements and the documentation.
- Perform critical aesthetic visual inspection of interior finish parts
Qualifications:
- Minimum 10 years of experience in aerospace
- Minimum 8 years of experience in inspection
- Able to read engineering drawings
- Quality assurance background with painted metallic parts
- Experience inspecting machined parts
- Experience doing visual inspection of plated parts
- Experience inspecting interior finishing components
- Experience using various mechanical inspection tools, such as micrometers and calipers
- Candidate must be detailed oriented and have a good eye for minor defects
“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law. Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”
Industry: Aerospace/Defense
Position: Electromechanical Inspector
Location: Myrtle Beach, South Carolina
Duration: On-going contract
Frequency: 15 hrs per week / Contract or W2 opportunities available.
Job Description:
- The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on circuit card assemblies (CCA), cable harness, connectors, manufactured parts, assemblies, and / or sub-assemblies.
- Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications.
- The inspector will be required to report inspection accept / reject information directly to the customer via web application.
Requirements:
- Inspector must have practical experience performing in-process and final inspections on circuit card assemblies (CCA), cable harnesss, connectors, machined parts, assemblies, and / or sub-assemblies.
- The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard.
- Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers.
- Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge of standards J-STD and IPC-A-610 are required.
- Current IPC-A-610 or J-STD-001 certification or working knowledge. If certification has been held but is expired; expiration date required.
- Ideal candidate will have a minimum of 10 years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel.
- Must have a laptop and cell phone.
- Citizenship compliance - U.S. Person
“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law. Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”
Industry: Aerospace/Defense
Position: First Article Inspector
Location: Red Oak, TX
Duration: 6 month contract
Frequency: 40/hrs per week - Full-time - W2 assignment
Pay Range: $35-$40
Currently seeking a First Article Inspector to support our customer in Red Oak, TX.
The inspector will be responsible for inspecting completed structural assemblies as per the customer requirements and report any non-conformance.
Job Description :
- Perform FAI inspection of completed assemblies at customer site
- Perform source inspections of the structural and mechanical installations required by the documentation
- Ensure parts are conformed to the engineering requirements and the documentation
- Identify and document any non-conformance
- Ensure shipping inspection document is accurate and complete
- Interact directly with the supplier in order to coordinate and schedule deliveries with the Verify customer.
- Ensure parts will be delivered on time
Requirements:
The candidate has:
- Must have over 10 years of experience in Aerospace
- Candidates must have recent experience with validating FAIs to AS9102
- Experience with Net inspect
- Inspector must have practical experience performing receiving inspection on machined parts, assemblies, and / or sub-assemblies.
- The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard.
- Must have the ability to read / interpret engineering drawings and Purchase Orders (POs).
- The inspector must have experience using various mechanical inspection tools, such as micrometers and calipers.
- Experience in Expediting part through the manufacturing process
- Experience in Project Management
- Experience making status review and report.
“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law. Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”
Industry: Aerospace/Defense
Position: Source Inspector
Location: Cazenovia, New York
Duration: On-going contract
Frequency: Approx. 8 hours per week. May fluctuate depending on supplier activity
Job Description:
- Candidate will be conducting source inspection at supplier location.
- Should be knowledgeable in electronics commodities and defense requirements and able to review supplier PO's and required certs.
- Will be inspecting RF and Microwave Assemblies.
- The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies.
- Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications.
- The inspector will be required to report inspection accept / reject information directly to the customer via web application
Requirements:
- Current IPC-620 Certification Required
- Minimum 5 years mechanical source inspection experience. Experience must be within the last 2 years in aerospace or military / defense manufacturing.
- Minimum 2 years of hands on first article inspection (FAI) experience to AS9102. This must be a strong knowledge and understanding.
- Minimum 5 years’ experience inspecting Complex Machine Parts/Assemblies/Composite Parts.
- Candidate must have a strong knowledge and understand of GD&T per ANSI Y. 14.5
- Knowledge of tight tolerance is required.
- Candidate must have mobile phone availability and their own laptop, with e-mail and internet access, to bring on site to the supplier location.
Industry: Aerospace/Defense
Position: Electro-Mechanical Inspector
Location: Brookfield, Wisconsin
Duration: on-going contract
Frequency: 8/hrs per week
Job Description:
- The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and/ or sub-assemblies.
- Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications.
- The inspector will be required to report inspection accept / reject information directly to the customer via web application.
Requirements:
- Candidate must have practical experience performing in-process and final inspections on machined parts, assemblies, and/or sub-assemblies.
- The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard.
- Must have the ability to read / interpret engineering drawings and Purchase Orders (POs).
- The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers.
- The candidate must have at least a minimum of five (5) years performing First Article Inspections (FAIs) in accordance to the AS9102 standard.
- Must have at least a minimum of five (5) years experience with forms 1-3.
- This will include being able to measure personally and complete 100% validation of the product.
- It is desired that the Candidate should have at least five (5) years of experience of applicable industry standards like IPC-A-610 or equivalent.
- Ideal candidate will have a minimum of five years’ experience performing inspections in aerospace or military/defense manufacturing with proficiency using Microsoft Word and Excel.
- Must be comfortable working as an independent contractor (1099).
- Must have laptop computer and cell phone.
- The Candidate must satisfy the Citizenship requirements - they must be a US Citizen
Testing Requirements
- AS9102 - Rev B - Assessment
- Mechanical Commodity Assessment
Industry: Aerospace/Defense
Position: Mechanical Source Inspector
Location: Riverside, Missouri
Duration: On-going contract
Frequency: 1/hr per month - 1099
We currently have a need for an experienced mechanical source inspector to support in Kansas City, MO and St. Louis, MO for an on-going contract on-demand (avergae once a month). Long distance travel may be required.
Job Description:
- Perform mechanical inspection using precision measuring devices/instruments at supplier’s facility to verify compliance to drawings, standards/specifications and other PO requirement.
- Verify material certifications against PO requirements, part marking where required and visually inspect for obvious defects/ damage.
Skills Requirement:
- Minimum 5 years of hands-on precision mechanical inspection experience is required
- Strong understanding of, and experience with, ANSI Y 14.5 GD&T
- Ability to read and interpret drawings and basic computer skills are a must
- Experience working with tight tolerances
- Hands-on mechanical inspection experience
- Must have experience working with Mil-standards
- Previous source inspection experience
Requirement:
- Will be working as an independent contractor (1099).
- Must have LLC/DBA or able to obtain an LLC/DBA
Looking for Contract Support (Mechanical Inspection) for 2-3 visits per month in Puerto Rico; Ongoing
Mechanical InspectorJob Description:
The Mechanical Inspector will travel to various supplier facilities to perform visual inspections on manufactured parts, assemblies, and / or sub-assemblies. Parts are inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. The inspector will be required to report inspection result(s) information via web application.
Requirements:
- A minimum of 5 years of current Mechanical inspection experience within the last 10 years (Recent Experience).
- Recent experience to include inspection of: Mechanical/Structural assemblies, machined parts, sheet metal parts, castings and forgings.
- Must have recent experience performing First Article Inspections (FAI) to the AS9102 Standard.
- Recent Experience must be Aerospace industry related
- A working understanding of:
- Root Cause and Corrective Action (RCCA)
- Geometric Dimensioning & Tolerancing (GD&T) per ANSI Y 14.5
- Blueprint reading, specifications and Purchase Orders.
- Expertise in the use of general inspection hand tools (i.e., calipers, go-no go gauges, thread gauges, pin gauges, height gauges, micrometers, etc.).
- Candidate should be computer savvy and own a laptop and cell phonefor this assignment.